Guide For Heavy Duty Scan Tool Reviews In [2020]

Guide For Heavy Duty Scan Tool Reviews In [2020]. If you are looking for heavy duty scan tool than this review article may help you.

Last Update:

Our team scanned 46226 reviews before writing any suggestions for Heavy Duty Scan Tool in this article.

Guide For Heavy Duty Scan Tool Reviews In [2020]

Do not you look for Heavy Duty Scan Tool Reviews? Than read each of our listing properly. We have scores on ten selected products for Best Heavy Duty Scan Tool . Based on 46226 reviews publicly available online for Heavy Duty Scan Tool Reviews our team created this shortlist. Hope it will help you to find Best Heavy Duty Scan Tool with us.

NoProductScoreAction
1ANCEL BST500 12V/24V 100-2000 CCA Automotive Battery Load Tester, Car Cranking and Charging System Analyzer Scan Tool with Printer for Heavy Duty Trucks, Cars, Motorcycles and More (Black and Red)9.8Buy On Amazon
2Bosch 1699200240 HDS 250 Heavy Duty Scan Tool9.4Buy On Amazon
3JUTA BTP500 12V/24V 100-3000 CCA Automotive Battery Load Tester, Cranking and Charing System Digital Analyzer Scan Tool with Thermal Printer for Cars, Heavy Duty Trucks, Motorcycles and Boats9.2Buy On Amazon
4Autel MaxiCOM MK808 OBD2 Diagnostic Scan Tool with All System basic diagnostic functions and combination of Service Functions including Oil Reset, EPB, BMS, SAS, DPF, TPMS9Buy On Amazon
5Autel Maxisys MS908CV Heavy Duty Diagnostic Scan Tool with J-2534 ECU Programming,Bluetooth/WiFi Enabled & Wireless Connection8.8Buy On Amazon
6FCAR F506 heavy duty truck scanner Enhanced HD diesel scanner Full-systems diagnostic tools with Engine/ABS/VCS/EBS/SRS/Suspension/Battery/Cluth Transmission Check Trucks & Cars 2 in 1 Codes Reader8.6Buy On Amazon
7Heavy Duty Diesel Truck Diagnostic Scanner for Freightliner Cummins Code Reader - NexLink NL1028.6Buy On Amazon
8OTR Performance Cummins | Heavy Duty Diagnostic Tool | Reset Aftertreatment System | Forced DPF Regen | Clear Active/Inactive Codes8.6Buy On Amazon
9UNIVERSAL HEAVY DUTY DIESEL TRUCK DIAGNOSTIC SCANNER TOOL CODE READER NEXAS HD8.4Buy On Amazon
10LAUNCH X431 V+ (Upgrade Version of X431 V PRO) Bi-Directional Key ECU Coding Actuation Test Diagnostic Scan Tool with 20 Reset Functions, IMMO, ABS Bleeding TPMS Reset Full System 2 Years Free Update8.4Buy On Amazon

Table Of Content:

1. ANCEL BST500 12V/24V 100-2000 CCA Automotive Battery Load Tester, Car Cranking and Charging System Analyzer Scan Tool with Printer for Heavy Duty Trucks, Cars, Motorcycles and More (Black and Red)

  • 1. BST500 battery tester is a more advanced tool with the ability to test motor vehicles, marine, motorcycle, boat, and truck batteries. Designed for 12V battery test, it nevertheless can be used for both 12V and 24V starting and charging system .
  • 2. This battery analyzer can test 12V lead-acid battery, including regular flooded, AGM flat plate, AGM spiral, gel, and deep cycle battery. It covers all battery rating standards such as CCA, BCI, CA, MCA, JIS, din, IEC, EN, SAE, GB standards.
  • 3. It’s fast and accurate to display the battery parameters of about 2.5 seconds to advise you of filled with a battery is low or charging/place of conditions .
  • 4. The unit is housed in a rugged casing for easy hand-holding. It is lightweight and a backlit display screen clear to read in any lighting conditions.
  • 5. Its built-in printer uses standard thermal printer paper, so you can easily attach a printout to a work, to share with your customers or creating a preventative maintenance program with record keeping.

2. Bosch 1699200240 HDS 250 Heavy Duty Scan Tool

  • Read and clear HD standard trouble codes
  • Display code description
  • Display and graph live data with
  • Record and playback data streams
  • Brilliant color performance and durability for rugged enclosure
  • The yellow cable is the picture for optional purchase and does not come with the purchase of a 1699200240. Optional cable item number is 1699200247.

3. JUTA BTP500 12V/24V 100-3000 CCA Automotive Battery Load Tester, Cranking and Charing System Digital Analyzer Scan Tool with Thermal Printer for Cars, Heavy Duty Trucks, Motorcycles and Boats

  • Works with cars, trucks, motorcycles, boats, and lawn mowers. It allows you to diagnose the health of the battery state without disconnecting the battery . Designed for 12V battery test 12V & 24V starting/charging system
  • Test range (100-3000 CCA) for testing 12V/24A lead-acid, flooded, AGM and gel battery compliant with the CCA, BCI, CA, MCA, JIS, din, IEC, EN, SAE, GB standards
  • Ideal for measuring the remaining battery load, the output voltage, accumulating the charge capacity, cold cranking amps (CCA) and other parameters. Does not emit light, heat or spark, or discharge the battery keeps the Operation Safe for all levels of users.
  • Easy to use and convenient to carry . One-year limited . Supports English, Spanish, French, German, Italian, Polish.
  • A built-in thermal printer (thermal paper roll is replaceable). Premium copper clip and PVC coated wire, providing great connectivity and durability. Note: the printer BTP500 only works properly on the power of 12V or more. Before using the printer, please finish the car battery test and turn on the engine.
  • Fit type: universal

4. Autel MaxiCOM MK808 OBD2 Diagnostic Scan Tool with All System basic diagnostic functions and combination of Service Functions including Oil Reset, EPB, BMS, SAS, DPF, TPMS

  • 【MULTIFUNCTIONAL scan tool】 once accessed to the diagnosis service of the MaxiCOM MK808 scan tool, here are a variety of tasks, including the available oil reset and EPB/BMS/SAS/ DPF, the original TPMS service(MK808 can not Program the tire sensors), which are used for safety and efficient maintenance of systems.
  • 【Full system diagnostic】 so many special services, the whole system of diagnosis would not be absent. This diagnostic tool will give your car a full to find out all the systems (ABS, SRS, engine, transmission, brake system, emission control system, fuel system, lighting, wiper system. Etc. ).
  • 【Comprehensive vehicle coverage】 Autel MaxiCOM MK808 code reader works on most 1996 in the United States-based, 2000 the European Union is based on and new vehicles to complete system diagnosis, including reading/clearing codes and viewing live data to check the health status of the parts.To check wheather MK808 is compatible with your car or ask other questions, please send VIN number [email protected]
  • 【User friendly】 it’s a tablet diagnostic scanner with 7″touchable screen enables and sensitive response with a fast quad-core process, it is better than Autel md808/md808 Pro and MX808. Compared with MK808BT, MK808 just without the VCI, but the use of cable connections could provide quick and stable diagnostic speed.
  • 【Please be informed】 12 months warranty and 1 year Free Online updates are offered. In addition, 30-day free return service is available . Note:MK808 is compatible with most vehicle makes, but to make sure the MK808 can run super easily on your car, please send the VIN number to [email protected] or ask through the Q/A any problems, we are 24 hours for you.

5. Autel Maxisys MS908CV Heavy Duty Diagnostic Scan Tool with J-2534 ECU Programming,Bluetooth/WiFi Enabled & Wireless Connection

  • Designed for CV ➤ Autel MaxiSys MS908CV boasts pro-level for the diagnosis of commercial vehicles (expert, buses and trucks), to get all modules access to the ECU coding, active Test (bi-directional control), 23 Optimization Services, 25 service functions, read/erase codes and live data, etc., Being compatible with multiple protocols supported: SAE J1939, SAEJ1708, construction-defined protocols J1939, construction-defined J1708, KWP, VPW, UDS, can, CDL.
  • ECU coding ➤ this heavy duty diagnostic tool that allows you to re-flash the commercial vehicle control module, and write in the adaptive data for certain components after making repairs or replacement, to fix the issues: as Drivability, fuel efficiency, power loss, fault codes durability of mechanical parts, etc . (Note: coding only changes the preprogrammed options in the already existing software.)
  • 23 conversion functions ➤ this commercial vehicle scanner provides various 23 components optimization services, to check or reset certain components after repair or replacement: in the form of Doc/DPF immediate replacement, reset the fuel pressure optimization right after the reset, the treatment for Maintenance, Calibration rack sensor calibration injector trim, and with others, fast navigation for optimal efficiency .
  • 25 service functions ➤ this automotive diagnostic tools can read/clear the Code, see the graphic live data, and an array of features 25 guided maintenance services as: oil reset, injector coding, DPF, brakes, ABS/SRS, suspension, throttle, odometer, lang change, Headlamp, CHG tire size, Airbag reset, cylinder, Turbocharging, range, clutch, victory Dr ceiling, TEC, learn the Trans conversion, Immo, key TPMS, BMS, brake bleed, seats etc .
  • The ultimate scanner ➤ Autel MS908CV you have all the necessary functionality, while still remaining easy to use with enhanced multitasking performance: Android 4.0 operating system, quad-core processor, 2GM RAM and 32GB SSD, 9.7″ 1024*768 IPS screen, 11000 mAh battery (8hrs non-stop operation), 5.0 M AF rear camera, etc., And a whole set of adapters and check-in is at your disposal. This scanner is entitled to 1 year warranty with 1-year free software updates. Welcome to contact us for your vehicle’s compatibility check, 24/7.

6. FCAR F506 heavy duty truck scanner Enhanced HD diesel scanner Full-systems diagnostic tools with Engine/ABS/VCS/EBS/SRS/Suspension/Battery/Cluth Transmission Check Trucks & Cars 2 in 1 Codes Reader

  • ➤【All the tasks in your hand】this truck scanner is capable of reading and clearing the trouble code of all the major systems of the truck , including engine, airbag, transmission,ECU/BCU,VCs,ABS,SRS,EBS,DCU,on, cluth system/brake system/meter system/battery system/inverter system/hybrid system/immobilizer system,ect. Special functions perform various component adaptations on control modules under testing, allowing you to check or some components after you configure the repair or replacement.
  • ➤【Advanced features for truck】graph live data with the engine speed,engine ECU temperature, percent acceleration pedal position,engine intercooler temperature, engine coolant temperature,battery voltage,alternator voltage,ambient air temperature,air inlet temperature,set measurement units in SAE English/metric.,Internet upgrade,normal functions :read ECU information,read and erase fault codes,read live data,read freeze frame,graph live data,the screenshot function.
  • ➤【Wide application】HD for trucks: Freightliner, for Fuso, for the GMC,Hino, International, for Isuzu, for Toyota, Kenworth, Mac to for Mercedes, Nissian ud,Peterbilt, Sterling, Western Star, Volvo,for Allison, for Bendix, to Eaton, to WABCO, to ZF,ect.And all cars /min Van / light duty from 1996.F506 code reader can also be used as a universal OBD-II code reader read and erase the codes on other brands of cars OBD system.
  • ➤【Strong compatibility】works on most trucks with J1708 and J1939 plus OBD2 motor vehicle coverage and cover Hino, Mishubishi Fuso, Isuzu and Nissan UD commercial vehicles . Since 1992 supports SAE J1850PWM, SAE J1850 VPW, IS0 14230-4, IS0 9141-2,IS0 15765-4, SAE J1708, SAE J1939, OBDII, scan diagnostic and the fault code with the Code definition in the engine, transmission, ABS brakes and instrument cluster or body control.
  • ➤【Win in description】F506 obd2 scanner comes with new UI, new processor and new software that provide you the best clinical experience. A major update, 3.5″TFT color screen and languages will make you fall in love with it instantly. The response and operating speed increased by 60% in the same time. This durable tool is ruggedly built, perfect for both shop and road test. It can be used directly is.

7. Heavy Duty Diesel Truck Diagnostic Scanner for Freightliner Cummins Code Reader – NexLink NL102

8. OTR Performance Cummins | Heavy Duty Diagnostic Tool | Reset Aftertreatment System | Forced DPF Regen | Clear Active/Inactive Codes

  • Start a forced DPF REGEN: a forced DPF regen is done when a diagnostic scan tool, such as OTR reset tool starts the regen process. DPF soot load can be very high for a passive and active regen to occur because of a condition where it is necessary to force DPF regen.
  • Reset engine learned data: this will give you the relief you need knowing that you can make it to your destination safely, while decreasing downtime.
  • Works on PETERBILT / international / Mack / international with CM2250, CM2350, ISX, CM871 engine: you can replace the engine-related sensors on the road and just plug-in OTR for the reset tool to clear and reset the system.
  • Save time and money: active fault code due to excessive downtime as you try to find a repair shop and then you get in the end and arrive at a repair shop you are waiting, possibly for hours only to learn you can make it to your next destination with no problem.

9. UNIVERSAL HEAVY DUTY DIESEL TRUCK DIAGNOSTIC SCANNER TOOL CODE READER NEXAS HD

10. LAUNCH X431 V+ (Upgrade Version of X431 V PRO) Bi-Directional Key ECU Coding Actuation Test Diagnostic Scan Tool with 20 Reset Functions, IMMO, ABS Bleeding TPMS Reset Full System 2 Years Free Update

  • 【Advanced oe-level diagnostic tool】launch X431 V + diagnostic tool covers the IMMO matching (key coding) and the optimization function which allows you to reprogram adaptive data for certain components after repair or replacement. Other OE-level functions on the scan tool includes the ECU coding on the function of the BMW, online coding on Audi, VW and Porsche, etc., Offline coding tasks, customization / personalization and direct actions etc .
  • 【Active test and compatible with the HD module to diagnose the CV】 bi-directional control information to request or order an actuator to perform specific tests, such as the opening / closing rearview mirror display, an evaporative emissions leak test or test wipers and fast troubleshooting the actuators. X431V+ compatible with the HD module to turn it into a professional scanner, for commercial vehicles, which avoids you from buying another scanner for heavy duty vehicles.You can purchase it if needed.
  • 【20 service function and one-click Update】launch X431 V + diagnostic tool supports 20 reset function: engine/ABS/SRS/transmission reset, ABS bleeding, injector coding, gear reset, SAS reset, TPMS, reset ECU reset, IMMO reset, the BMS reset tickets reset, oil reset, brake reset, AFS reset, EGR optimization, GEARBOX, SUNROOF, SUS,reset,(Contact us if you need to confirm your car model) to fully meeting your needs. Wi-Fi enabled, so you can update your X431 V to up-to-date version for with just one click.
  • 【All system diagnosis for more than 10,000 car models】launch x431 V+ can read / erase codes, view live data and retrieve ECU version information in all vehicle systems, including ECM, TCM, ABS, SRS, BCM, IMMO, BMS, TPMS, SAS, fuel system, lighting and a/C system etc . Scanner supports is on 93 vehicle makes and up to 10,000 of car models from America, Europe, and Asia etc.
  • 【Rapid diagnosis and 5 years warranty】auto VIN on the X-431 V+ can automatically identify the car make, module and year with only one click, which is more efficient and saves you from the hassle of manual selection. Launch X431V a 7.1 Android-based diagnostic scanner with 10.1 IPS (1280 * 800), 7000mAh lithium rechargeable battery (up to 8 hours of battery life), 32 GB of storage capacity, wireless feature can perform diagnosis quickly and efficiently.The scanner comes with 5 years warranty free.

About The Author